Border damage

UPS got you down? eBay making you cry? Need to rant? Do it here.
Post Reply
User avatar
justin
Giant
Posts: 1165
Joined: Mon Jun 21, 2010 1:17 am
Location: california

Border damage

Post by justin »

I posted this on the anticipation thread for the print, but added some more for this section. Its the Fairey x COPE2 x Cooper print. Photos were taken as I cut the tape and unrolled the print.

Image
Image
Image
Image

I'm sure the folks at OG wrapped it up correctly and the print just slid to the end during transit. The tube doesn't have any dents or anything, so its all quite weird to me.

Would it be too nit picky to claim damage on the print? Not sure how to handle this one.
User avatar
sas
Posse
Posts: 460
Joined: Sun Dec 14, 2008 12:01 am
Location: Chicago

Re: Border damage

Post by sas »

My prints have never come like that, I prob would give OG a call re that
User avatar
Gigantico
Carbon-Based Wastage
Posts: 6065
Joined: Tue Apr 03, 2007 3:20 pm

Re: Border damage

Post by Gigantico »

I wouldn't say that was too nit-picky. Good luck.
User avatar
whyhoo
itsame
Posts: 7569
Joined: Sun May 20, 2007 8:44 am
Location: I put on my robe and wizard hat

Re: Border damage

Post by whyhoo »

Gigantico wrote:I wouldn't say that was too nit-picky. Good luck.

agreed - they're pretty good about taking care of the custies!
on point like a decimalist?
User avatar
ciphe
Posse
Posts: 271
Joined: Tue Nov 09, 2010 3:56 pm
Contact:

Re: Border damage

Post by ciphe »

my print cope print came the same way, just filed a UPS claim
User avatar
MarshMan65
Propaganda Engineer
Posts: 529
Joined: Sat Nov 06, 2010 11:57 am
Location: DFW

Re: Border damage

Post by MarshMan65 »

Definitely ask for a replacement..
"save a pretzel for the gas jets!"
User avatar
justin
Giant
Posts: 1165
Joined: Mon Jun 21, 2010 1:17 am
Location: california

Re: Border damage

Post by justin »

There is one AP replacement, but its damaged (has a tear). Told them I would take my original back if its in better condition than the AP.
cincysig
Punk
Posts: 17
Joined: Tue Jun 08, 2010 5:10 pm

Re: Border damage

Post by cincysig »

Had minimal border damage on my COPE print, too.
Post Reply